Electric Hot Water Systems Adelaide
Electric Hot Water Systems in Adelaide: Installation, Repairs and Replacement
If your shower is going cold, it could be a problem with your electric hot water system. Once you know there’s something wrong with your heater, the next decision is whether to fix it, replace it, or switch to another way of heating your water.
There are a few things you need to consider when deciding on what to do with your faulty electric hot water system.
Electric hot water systems come in many forms. They can store water and heat it, or heat it instantly as it goes to your tap. Heat pumps use air to heat the water stored in your tank.
Contents
- How do electric hot water systems work
- Which electric hot water system is best for my home?
- How much do electric hot water systems cost to run?
- Signs your electric hot water system needs repairing
- Electric hot water installation and replacements in SA
- Electric Hot Water Installation and Repairs in Adelaide
- Frequently Asked Questions About Electric Hot Water Systems
- Contact Koala Plumbing Today
How do electric hot water systems work
Traditional electric hot water systems have a heater inside them that heats the water up and stores it in an insulated tank. This is then used around your house to provide hot water. Your thermostat will turn on the heater to ensure your water is kept at the desired temperature.
Instantaneous electric hot water systems heat your water as it passes through the hot water system. These take up less space but can require a large amount of power to operate. According to the Australian Government YourHome website, many higher-output instantaneous electric models require a three-phase supply.
Heat pumps are also run on electricity. However, they pull heat from the outside environment and use this to heat your water.
Which electric hot water system is best for my home?
Your electric hot water system should meet your demands and suit your current set up.
Before getting a quote for a new electric hot water system, think about these points.
- How many people are showering in your home? Are your bathrooms being used at the same time?
- Take photos of your current hot water system, write down the model and how long your hot water lasts.
- What sort of power do you currently have? Ask your installer if your switchboard can handle the system you are considering.
- Do you have solar panels or are you on a controlled load tariff?
- Where do you want to place your hot water system? Do you have the required space and drainage? If you are thinking of getting a heat pump, how loud is the system outside?

Your plumber will be able to work out how much hot water your family needs.
Depending on your house, there may be some limitations to installing a hot water system in South Australia; these will be taken into consideration when looking at replacement systems.
How much do electric hot water systems cost to run?
Running costs depend on water use, system efficiency and electricity tariffs. So buying a cheap electric hot water system may not save you money in the long run.
The Australian Government states that heat pumps use around 30% of the energy of a conventional electric hot water system. Results vary by model, electricity prices and household water use.
You can also look into whether your hot water system can be put on a controlled load tariff or heated using solar power during the day.
When choosing an electric hot water system, ask your installer how much it will cost you to install and how much it will cost you to run each month.
Signs your electric hot water system needs repairing
Not every fault calls for replacement. Look for these signs:
- No Hot Water: Your hot water system could have a number of issues, have it looked at by your plumber.
- Lukewarm Water: Your system may not be heating the water, or you could need a larger tank.
- Leaking Around Your Tank: There may be a small leak from a valve or plumbing, or your tank could be leaking. Get this checked promptly.
- Discoloured hot water or strange noises from the heater should be inspected.
- Your water-heater circuit breaker keeps tripping. Stop resetting your breakers and get your system checked.

If you find that water is getting to electrical items, do not touch the hot water system and have an electrician look at the issue. Your plumber will be able to let you know what parts need to be repaired.
Let your plumber know what model you have, where it’s leaking and if all the taps are not producing hot water.
Electric hot water installation and replacements in SA
Check heater eligibility with the South Australian Government. Water heater installations must be done by a licensed or registered plumber. Your plumber must provide a Certificate of Compliance when the job is complete.
Your current hot water system and replacement options should be evaluated, as well as any plumbing, drainage and electrical requirements. If you require an electrician, they must be licensed for this work.
For hot water safety, the South Australian Government states water delivered to showers, baths and hand basins must be no hotter than 50°C. The water in your tank should be above 60°C to prevent bacterial growth.
Your installer should make sure the temperature control devices are working, and advise you on how your new hot water system will operate. Do not play around with electrical parts on your hot water system or adjust your water temperatures.
Electric Hot Water Installation and Repairs in Adelaide
Koala Plumbing Adelaide offers installation, repairs and replacement of electric hot water systems, gas, solar and heat pumps across Adelaide metro areas and surrounding suburbs, and services the Adelaide Hills area.
With up front pricing, free quotes and 24-hour emergency plumbing services, Koala Plumbing Adelaide offers same-day installation, subject to the job and scheduling.
Give Koala Plumbing Adelaide your hot water system make and model, and a photo of where the system is located and describe your issue.
FAQs
Frequently Asked Questions About Electric Hot Water Systems
It depends on the issue. Koala Plumbing Adelaide can inspect your system to see whether it’s worth repairing or if you should replace it.
Yes, there are some advantages to having a heat pump. Have your installer make sure your house is suitable for one.
It’s hard to say, as each system has its pros and cons. Speak to your plumber, and they can advise you on which option is best for your home.
Depends on what issue you have and what type of system you’re allowed to install. Koala Plumbing Adelaide may offer same-day installation. Speak to the team when you book your hot water system.
Contact Koala Plumbing Today
Choosing the right electric hot water system depends on your household’s hot water needs, electricity supply, available space and budget. Whether you’re considering a traditional storage tank, instantaneous system or heat pump, it’s worth comparing installation requirements and ongoing running costs before making a decision.
If your current system is leaking, struggling to heat water or no longer meeting your needs, having it inspected can help you decide whether a repair or replacement is the better option.
Koala Plumbing Adelaide can assess your existing system, explain your options and provide upfront pricing for electric hot water repairs and installations.
Call Koala Plumbing Adelaide on 0433 539 117 to speak with a plumber or request a free quote.
The only brands Koala Plumbing trusts
Areas of Service
We Go Everywhere in SA
We service all suburbs across the greater metropolitan area of Adelaide, including the Adelaide Hills.
