We service all suburbs across the greater metropolitan area.

Afterpay Logo

Heat Pump Hot Water Systems Adelaide

Integrated heat pump hot water system installed outside an Adelaide home
Split heat pump hot water system with storage tank and outdoor unit beside an Adelaide home

Heat Pump Hot Water Systems in Adelaide: How to Choose the Right One

When upgrading your hot water system, you have the opportunity to save money in the long run by choosing a more efficient system. If you use a lot of hot water, this can be beneficial to you for years to come.

Heat pump hot water systems will use electricity to move heat from the surrounding air into your hot water storage tank. Heat pump systems can consume less energy than a typical electric hot water system. For an Adelaide home, consider hot water demand, space, noise, electricity tariffs and installation needs.

How does a heat pump hot water system work?

Heat pump hot water systems operate similarly to an air conditioner. They have a fan that pulls in outside air and uses a refrigerant circuit to warm the water in the tank.

According to the Australian Government, a heat pump hot water system will use around 30% of the energy of a conventional electric hot water system. This is only for the hot water system, not your total electricity consumption.

When hot water is being used, the cold water entering the tank needs to be reheated. Your tank’s size and ability to reheat will affect how many showers you can take back to back.

Some heat pumps have a boost element that will help heat the water if the system can’t keep up with demand. Heat pump hot water systems do not require solar collectors like a solar hot water system, however they do need space around the unit for adequate air flow.

Diagram showing a heat pump drawing heat from outside air to warm water in the storage tank

Should you consider a heat pump in Adelaide?

There are many pros and cons to switching to a heat pump hot water system. If you’re looking to lower your energy consumption, then this could be an option for you, just make sure you consider your home’s situation, model and rate.

  • Uses less energy: As mentioned above, the heat pump uses a compressor to transfer heat, not create it using electricity.
  • Use your solar: Many heat pump models can be timed to run during the day while your solar panels are generating electricity.
  • Room for your system: You can choose to have an integrated or split system, allowing for flexibility in your home.
  • Cost: Heat pump systems will usually be more expensive to purchase than your standard electric hot water system.

When comparing systems, compare energy usage and installed costs over the same period of time. Don’t just look at the percentage of electricity used, it’s not going to translate to how much you’ll save.

Also take into consideration outside temperatures, as per the Australian Government’s YourHome website. Adelaide has some cold mornings, so this can be something to discuss when selecting your system and running schedule.

What to look for when selecting a heat pump system

When deciding what size heat pump you need, you want to look at the size of your tank and how fast it can reheat. First, work out what times you use the most hot water in your home, not what your old tank’s size was.

If your household takes multiple showers back to back, you will need a larger reserve of hot water, compared to someone who takes one quick shower in the evening. Your chosen manufacturer’s specification on tank size and ability to reheat should give you this information.

  • How much hot water you use: Work out how many showers, baths, etc. your home uses. Make sure you have enough hot water to last your busiest period.
  • Ability to reheat: Look at what the manufacturer says their system is able to do, especially if colder weather may affect performance.
  • Ventilation and Noise: Make sure you can place the system somewhere it has good air flow and won’t be too close to bedrooms or neighbours.
  • Power Rate: Check what times you can run the heat pump, whether you have solar, and what rate you are currently on.
  • Warranty: Find out how long the tank and compressor are warrantied for and if you will have access to service and parts.

As stated above, you have the option to install an integrated unit or split your tank and heat pump fan. Both options will need proper ventilation and access for servicing.

You want to know where any excess condensation will drain and if you’ll have easy access to service the system in the future. This can become a hassle if your home isn’t suited for certain models.

Always ask for quotes on two models, based on what your household usage is. This will give you an idea of what your options are when replacing your hot water system.

Integrated heat pump hot water system beside a split system with a separate outdoor unit and tank

Heat pump installation, rebates and what to ask when getting quotes

Your cost to install a heat pump will depend on many factors. Pipework, electrical work, drainage, site access and removal of your old system can affect the price.

If you already have a hot water system installed, you may still need additional space to fit a heat pump system. This can lead to extra piping and electrical work, always have someone come out and assess your situation.

Only a licensed or registered plumber can install a water heater in South Australia, you must be given a plumbing electrical CoC for the work. If electrical work is required, an appropriately licensed electrician must carry out this work.

Your heat pump may be eligible for STC’s, read more about this on the Clean Energy Regulator website. Make sure the model you want is listed on their website and meets the requirements; you may be able to receive a discount for eligible certificates.

South Australia’s REPS is an energy-efficiency scheme, not a direct government cash rebate and more information can be found on the ESCOSA website. If there are any eligible activities available, the provider will be able to let you know if you qualify and what discount you may receive.

  • Ask for prices before and after any rebate is applied.
  • Make sure you know what model, size, warranty and if any additional electrical work is included.
  • Will the old system be removed, the new system commissioned, and instructions and a CoC provided?

Don’t just accept a rebate because a model is cheaper, compare what your final cost will be and what you’re receiving.

When you need to get your heat pump repaired

If your heat pump is not heating, displaying an error code, leaking or making abnormal noises, you will want to have it checked. Having an error code can help the technician diagnose what may be wrong with your system.

Make sure you know how to check basic functions on your heat pump, like making sure the timer is set correctly. Always keep the intake area free of debris, but don’t remove any covers or try to fix anything electrical or with the refrigeration cycle.

Koala Plumbing Adelaide can install and service heat pumps. The team can inspect your current system and see if it’s worth repairing or look into other options for you.

If your heat pump continues to trip your power, don’t keep trying to reset it, call a professional to come and look at it.

Frequently Asked Questions

Common Questions

Yes, heat pumps can run in cold weather, it just depends on your model and outside temperature. Make sure your model will operate in your climate and if it has a boost element to help with colder temperatures.

No, heat pumps will run off electricity like any other appliance. You can set the system to run during the day if you have solar, this can reduce your consumption from the grid.

Yes, as long as your home and water usage is suitable for the conversion. You may also need to have a licensed gasfitter disconnect your old system.

Contact Koala Plumbing Adelaide about upgrading to a heat pump

Selecting your next hot water system can be tricky, but it all depends on your home. Koala Plumbing Adelaide provides hot water services. If you’re interested in upgrading to a heat pump give the team a call today to have your current system assessed.

The only brands Koala Plumbing trusts

  • Rheem logo
  • Rinnai logo
  • Caroma logo
  • Dux logo
  • Tradelink logo
  • Mitsubishi Electric logo
  • Bosch logo
  • Braemar logo
  • Vulcan logo

Areas of Service

We Go Everywhere in SA

We service all suburbs across the greater metropolitan area of Adelaide, including the Adelaide Hills.

Koala Plumbing qualified trade attending to a job in Adelaide

Get a Free Quote

Send an enquiry and we’ll contact you as soon as possible.

This field is for validation purposes and should be left unchanged.