We service all suburbs across the greater metropolitan area.

Afterpay Logo

Instant Hot Water Systems Adelaide

Continuous-flow instant hot water system mounted on the brick wall of an Adelaide home
Storage hot water tank installed against the brick wall of an Adelaide home

Instant Hot Water Systems in Adelaide: Choosing, Installing and Repairing

When your hot water decides to cut out, it can create chaos throughout the home. When it’s time to replace your old hot water tank, it may be worth looking into other options.

How much hot water you require, what fuel source is available to your home, and the type of installation that may be required are all factors to consider when looking for a hot water solution in Adelaide.

Instant hot water systems, also called continuous flow heaters, warm water as taps are opened rather than storing it in a large tank. Hot water can be generated continuously as long as the unit is sized correctly.

How instant hot water systems work

When water is flowing through an instant hot water system, it will begin to heat. This water will continue to heat as it makes its way to your outlet. When there is no water flowing, the system will stop heating.

As opposed to a storage hot water system, it won’t be constantly heating a full tank of water.

Water that’s currently in the pipes will also come out of your shower or bath first. So if your bathroom is further away from the hot water system, you may experience a delay.

Should I go with gas or electric?

Many homes can benefit from an instant gas hot water system, especially where hot-water demand is high. One benefit of a gas system is that it can be installed outside, freeing up space where your current tank may be.

An instant electric hot water system can also be a great option, particularly for a single outlet such as a kitchenette or basin. Electric continuous flow hot water systems for a whole house can require a larger power source. CHOICE notes that whole-house electric continuous flow systems usually require three-phase power.

Gas continuous flow hot water unit beside a compact electric instant hot water unit

Gas isn’t always cheaper than electricity, so it’s best to look into all options. You may also want to consider a heat pump hot water system if you’re looking into solar for your home.

Determine your flow requirements

How many people you have in your home isn’t necessarily how much hot water you require. How many showers/taps will be used at any given time is more important, particularly in winter when incoming water is colder.

Make a list of these things before you get your quotes:

  • How many bathrooms/showers can be used at one time?
  • Will a kitchen or laundry tap be on while someone is showering?
  • Where is your current hot water system located?
  • Do you have natural gas, LPG or an electricity supply on your property?

Testing your current flow rate can be helpful to determine what you’ll need. Simply fill a bucket from one of your showers on full blast for 10 seconds. Take the amount of litres you filled and multiply it by 6.

For example, collecting 1.5 litres in 10 seconds equals 9 litres per minute. You can also test your second shower if both will be used at the same time.

Some people will use their hot water differently to others. Make sure your installer understands your hot water needs when they come to size your system.

Some gas continuous flow systems will shut off if they aren’t receiving enough flow to activate. If you have a lower flow shower head, this could be something to ask about. Minimum activation flow differs from your hot water system’s flow output.

Installing an instant hot water system in Adelaide

Your plumber will need to assess your current hot water system, water pressure, pipes, gas/power, flue (if required) and where the new system will be installed.

There are fewer things to consider if you’re replacing a hot water system with a similar type. You may need to upgrade your gas, power or even pipes to install an instant hot water system.

When requesting quotes, check that the price includes removing your old hot water system, upgrading pipes/power and commissioning your new system. If there’s any damage to walls, this should be made good as well. Compare the full installation quote, not just the heater price.

All water heaters must be installed by a licensed/registered plumber and supplied with a Certificate of Compliance. Depending on your home and what type of system you install, you may need to meet certain requirements.

Hot water temperature should be something that you discuss with your plumber as well. South Australia has stated that the maximum temperature should not exceed 50°C at domestic fixtures mainly used for personal hygiene.

Troubleshooting an instant hot water system

Below are some common issues you may experience with an instant hot water system:

  • If you don’t have any hot water, make a note if there is an error code on your system. Also check if any other gas/electrical devices are operating.
  • If your shower turns from hot to cold, note whether the problem occurs when your tap is running at a lower rate or another tap is turned on.
  • Is your hot water taking longer than normal to come through? Check if your other taps take the same amount of time. It could be because your bathroom is far from your system.
  • If you see leaks or the system ignites unusually, turn off the system and have it looked at by a qualified technician.
Plumber checking the connections on a wall-mounted instant gas hot water system

If you smell gas, please evacuate your home and do not use any electrical equipment or flames. Call a gas fitter once you are outside your home. Do not return to your home until it has been deemed safe.

Provide as much information as you can to your plumber if you’re experiencing issues with your hot water system. Include the make, model, any error codes and when the problem occurs.

Frequently Asked Questions

Instant Hot Water Systems FAQs

It will not have a tank you need to drain, but your heater does have a max output—the amount of water it can heat. If you have too many fixtures on at once, it may not be able to keep up.

You may save money since you are not constantly heating a full tank of water. But this depends on your hot water usage, fuel prices, how efficient your system is, and how it’s installed.

There are many factors that need to be taken into consideration when changing your type of hot water system. Your plumber will need to look at the connections, piping, space, and requirements in your home.

Koala Plumbing Adelaide can help

Koala Plumbing Adelaide offers hot water services in Adelaide. Services include installing, repairing and replacing hot water systems.

Whether you’re experiencing hot water issues or thinking about changing to a continuous flow system, call for a qualified professional. Share your hot water usage and current system details so the plumber can advise on what will suit your home.

The only brands Koala Plumbing trusts

  • Rheem logo
  • Rinnai logo
  • Caroma logo
  • Dux logo
  • Tradelink logo
  • Mitsubishi Electric logo
  • Bosch logo
  • Braemar logo
  • Vulcan logo

Areas of Service

We Go Everywhere in SA

We service all suburbs across the greater metropolitan area of Adelaide, including the Adelaide Hills.

Koala Plumbing qualified trade attending to a job in Adelaide

Get a Free Quote

Send an enquiry and we’ll contact you as soon as possible.

This field is for validation purposes and should be left unchanged.