Gas Hot Water Systems Adelaide
Gas Hot Water Systems in Adelaide: Installation, Repairs and Choosing the Right Unit
When your hot water starts to fail, there is nothing worse than finding out you will be having a cold shower. There are many factors to consider when picking out a replacement system, such as your gas supply, water consumption and how your house is set up.
A gas hot water system burns gas to heat water in a storage tank or as water passes through a continuous flow unit. The right Adelaide system depends on peak demand, gas supply, installation space and running costs.
Koala Plumbing Adelaide can repair and install hot water systems around Adelaide and surrounding areas. Read more below to help you understand what may be best for your home if you are wanting to repair or replace your hot water system.
Contents
- How Do Gas Hot Water Systems Work
- Should You Choose Storage or Continuous Flow?
- Finding the Right Size For Your Home in Adelaide
- Repairing Your Gas Hot Water System
- Installing or Replacing Your Gas Hot Water System
- Safety Tips and Efficiency With Gas Hot Water
- Gas Hot Water Systems FAQ’s
- Book In Your Hot Water System Today
How Do Gas Hot Water Systems Work
A gas storage hot water system has a tank of water that heats up to a certain temperature and stores it until it’s used. Once the water begins to cool, it reheats it back to the set temperature.
A continuous flow hot water system will heat water as it passes through the system. It will continue to heat your water until there is no more hot water being demanded from it. There are no tank storage losses, but the heater and gas supply must meet the home’s peak demand.
According to the Australian Government, higher-demand continuous flow units may need larger gas pipes or meters. Check supply capacity before switching systems.
Should You Choose Storage or Continuous Flow?
Both have benefits, but one may be better for your home. You may want to go for gas storage if your home already has one installed and working. You can always ask about pricing and decide if you would like to switch to continuous flow.
- If you already have a gas storage hot water system and it is working for you, ask about gas storage. You can look into what it will cost to replace your current system and see what else is available.
- Continuous flow units can suit homes with limited installation space and those who want to heat water on demand. Just remember your gas may not be able to meet the demands of your system.
- If running costs matter, compare heat pump and solar hot water options too.
Remember, just because you have continuous flow doesn’t mean you will have unlimited hot water. It may continue to heat water, just not as fast or hot enough for more than one person using hot water.

Finding the Right Size For Your Home in Adelaide
Knowing how many people live in your home is a good indicator, but knowing how many people will be using hot water at any given time is even better.
There are many things to think about when finding the right continuous flow for your home. How many taps will be using it, flow rates, incoming temperature and outgoing temperature.
- Think about how many bathrooms you have and how many taps may be used at any one time.
- If you notice your water pressure decrease when using more than one tap, write this down and tell your plumber.
- Let them know if you plan to renovate and add more bathrooms to your home, or how many more people will be moving in.
Ask about your storage hot water system and how many litres it is. But don’t forget about the speed at which it can heat up the water, just because it has bigger storage doesn’t mean it will reheat quickly.
Your quote should include information about why your system will suit your home, if you need any extra piping etc.
Repairing Your Gas Hot Water System
If your water is cold, you may not always need to replace your hot water system. There are many things that can cause your system to stop heating, from a faulty ignition to water flow issues. Call a plumber or licensed gas fitter to inspect your system and let them know what’s wrong.
- Cold water: note any fault codes and whether other gas appliances work, but don’t open the heater or adjust gas components.
- Lukewarm or fluctuating water temperature may indicate a flow or control fault.
- If you notice water around your system, pipes, valve or maybe even your tank, it could be leaking.
- Hot water is running out, you may need a bigger storage tank.
Make a note of when the issue started, are all taps affected? Write down any codes that may appear, don’t touch any panels or remove anything from your gas line.
Once your tank has been repaired, you will want to know if the rest of your hot water system is working. If the tank has burst, then it’s most likely time to look at a replacement, speak to a gasfitter to see what your options are.
Installing or Replacing Your Gas Hot Water System
As you can see, there are many factors to think about when replacing your gas hot water system. Make sure the unit you choose is installed in the correct position, has the correct gas supply, vents/flues, water supply and output temperature.
- Tell the installer how many taps may run together and whether the current system fails at some taps or all taps.
- Request an itemised quote for the heater, old-unit removal, pipework and any electrical work.
- Make sure the licensed installer has tested and inspected your hot water, and provided you with any necessary certificates.
For installation or replacement in South Australia, licensed tradespeople must issue gas and plumbing electronic certificates of compliance (eCoCs).
If your current hot water system is similar to what you want installed, there may not be as many changes as if you were to replace your storage with continuous flow. Always ask what will be done to your home and how much it will cost.

Safety Tips and Efficiency With Gas Hot Water
Your hot water system should be safe to operate, but you must ensure your hot water temperature is set correctly. The maximum hot water temperature you can supply to your personal hygiene fixture in SA is 50°C. Hot water should be stored at a minimum of 60°C to avoid any bacteria build up and have appropriate temperature controls at the points of use.
Always ensure your hot water is safely stored, clean the area around it and check your taps are not leaking. Use a low-flow shower head to save water and reduce your hot water usage.
If you smell gas inside your home, evacuate immediately and do not touch any light switches or turn on any appliances. Once you are outside, follow the instructions by the SA government on what to do in case of a gas leak. Call a gasfitter, and if there is a fire, get to a safe place and call 000. Do not re-enter the home or use the heater until a licensed gasfitter has checked it.
Frequently Asked Questions
Gas Hot Water Systems FAQ’s
Two showers can run together if the heater has enough capacity. Depending on the unit, how much water it can supply, what temperature it’s coming in at and your home’s gas usage, you may find that your home is not providing enough hot water. Speak to an installer and ask them to calculate what your home will need.
Storage heaters lose heat while keeping water hot, but it depends on your gas usage and bill, and what other hot water options are available to you.
Depending on where your current hot water system is located, you may be able to convert it to a gas system. Speak to a licensed gasfitter to find out more about your home and how much it will cost.
Book A Gas Hot Water System In Your Home Today
When choosing a gas hot water system for your home in Adelaide, you’ll want to know what size will suit your home, whether you need a storage or continuous flow system, and what your current gas connection can do.
Your current hot water system may just need to be repaired. By getting a qualified gasfitter to come out and look at your system, they can advise you of your options and what system would suit your home. They can also make sure your hot water system is compliant when installed.
The only brands Koala Plumbing trusts
Areas of Service
We Go Everywhere in SA
We service all suburbs across the greater metropolitan area of Adelaide, including the Adelaide Hills.
